The method for transferring font files to XTOP devices varies depending on the OS version.
You can check the OS version by going to [Menu Screen]-[System Information] on your XTOP device.

 

 

* For OS Version V3.1:
1. Launch the [Transfer Menu-Excute Transmitter] menu in XDesignerPlus V2.6.

2. Click the [File Select] button and select the following font files [88Eng 816Eng 1616HanMingchoGothic 1632Eng 3232HanGothic 0606Eng 1212Eng Rev.FON]. (You can download these font files from our official website.)

3. Choose the appropriate transfer channel (Ethernet/USB/Serial) based on your cable connection, then click the [Transfer] button to begin transferring the font files.

 

* For OS Version V4.8:
1. Launch the [Transfer Menu-Execute Transmitter] menu in XDesignerPlus V4.8.

2. At the top left, select [OS FONT], then click the [...(File Select)] button located in the middle-right area.
   Navigate to the path: C:Program Files (x86)M2I CorpXDesignerPlus4OSFONT, and select the font file (FONT00_....FON). 
   Make sure to change the file type to [Font File (*.Fon)] to view the font files.

3. Based on your connection type, select the appropriate transmtting channel (Ethernet/USB/Serial) from the top right, then click the [Transfer] button to send the font files.

 

 

* Note for TOPR/RX/RW/RE/RH Series: For these models, the OS is updated automatically when the project file is transferred. Therefore, OS/FONT files cannot be transferred separately.