The method for transferring files varies depending on the OS version of the XTOP product.

You can check the OS version on the XTOP device by navigating to [Menu Screen] - [Information].

 

If the OS version of your XTOP device is V3.1:

1. Insert the USB memory stick into your PC. Create a folder named [-HMI-] on the USB, and then create a [SYS] folder inside it.

2. Run the XDesignerPlus V2.6 software and go to [Transfer] - [Build and Transfer]. In the Project Builder screen, click the [Create TRN] button at the top and save the file as [PIC00000.trn] inside the SYS folder under the -HMI- folder on the USB memory stick.

3. Insert the USB memory stick into the XTOP device. On the main menu screen of the touch panel, go to [Initial Settings] - [12. Import from USB], select [Project], and press the Enter key.

Note: The OS file for XTOP can be found in the XDesignerPlus installation path ([C:Program Files (x86)M2I Corp\XDesignerPlus\OS]). Save the OS file for XTOP (e.g., xtop rom2 v3.1(2013-10-28).bin) as [OS000000.bin] inside the SYS folder under the -HMI- folder on the USB memory stick, and proceed in the same way as above.

 

If the OS version of your XTOP device is V4.8:

1. Run XDesignerPlus V4.8 and select [Transfer] - [Build and Transfer].

2. In the [Project Builder] screen, click [Create TRZ] at the top to save the TRZ file.

3. Change the extension of the TRZ file to .zip and extract its contents.

4. Copy all extracted files and paste them into the [PRJ] folder inside the [-HMI-] folder on the USB memory stick.

5. Insert the USB memory stick into the XTOP device. On the menu screen, go to [Interface] - [USB Storage] - [File Copy]. Select [Project File] as the file type, then press the [USB->HMI] button to download the project from the USB to the XTOP device.

6. Once the copy is complete, remove the USB memory stick and reset the device power.

 

If you need further clarification or have additional content to translate, feel free to provide more details!